Panasonic PT-REQ15LBU
Overview
Panasonic PT-REQ15LBU
4K 1-Chip DLP™ Laser Projector with 15K Lumens (no lens)
The Panasonic PT-REQ15LBU expands functionality, interfaces, and options for a smoother workflow. It suits new optional lenses featuring powered center and periphery focus and has an Intel® SDM-ready slot. The optimized optical engine enables projection at 15,000 lumens on AC 100–240 V power for efficient installation without needing electrical construction.
Quad Pixel Drive creates smooth 4K images, displays 2K/240 Hz content without blur, and works with our ET-SWR10 Real-time Tracking Projection-Mapping System. Rich Color Enhancer ensures accurate red for artwork, while Evolved Dynamic Contrast boosts image realism dramatically. Black-level settings offer precision point-based border adjustment for arbitrary screen shapes.
The PT-REQ15LBU features an optical engine and laser light source module compliant with the IP5X Dust Protected (IEC 60529) standard and a refined liquid cooling system. This technology enables up to 20,000 hours of continuous maintenance-free projection. Backup Input and Multi Laser Drive Engine further enhance reliability and insure against interruptions.
Note: Lens not included. For a model with a lens, see the PT-REQ15BU.
Features
Spectacular Visuals on a Grand Scale
- Quad Pixel Drive creates smooth 4K (3840 x 2400)6 images, displays 2K/240 Hz3 content without blur, and works with our ET-SWR10 Real-time Tracking Projection-Mapping System7.
- Rich Color Enhancer ensures accurate red for artwork.
- Evolved Dynamic Contrast boosts image realism dramatically.
- Black-level settings offer precision point-based border adjustment for arbitrary screen shapes.
Effortless Workflow and Expanded Capabilities
- New optional lenses feature powered center and periphery focus8
- Intel® SDM-ready slot
- Optimized optical engine enables projection at 15,000 lumens1 on AC 100–240 V power
- User test-pattern registration9
- NFC function10 for setup prep without AC power
- Pre-activated upgrade kits for Geo Pro11
Supremely Reliable Maintenance-Free Operation
- Optical engine and laser light source module compliant with the IP5X Dust Protected (IEC 60529) standard12
- Refined liquid cooling system
- Up to 20,000 hours13 of continuous maintenance-free projection
- Backup Input14 and Multi Laser Drive Engine
Notes
1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped.
3 Supports input signals up to 1080p. The display frame rate corresponds to the input signal frame rate.
6 Maximum physical resolution with Quad Pixel Drive [ON].
7 Optional ET-SWR10 is used in conjunction with third-party devices (sold separately). Compatibility with third-party devices cannot be guaranteed. Other conditions apply.
8 Lens release date varies depending on the model. Powered periphery focus adjustment is not supported on the ET-C1S600 and ET-C1T700 lenses.
9 Supports PNG (1/8/16/24/32/48/64-bit, non-transparent, alpha blending disabled) and BMP (1/8/24-bit) formats with a maximum resolution of 3840 x 2400 dots.
10 Projectors sold in some countries or regions require an ET-NUK10 Upgrade Kit available from PASS to activate the NFC function.
11 Visit PASS to register your projector and download free Geometry Manager Pro software for Windows® (upgrade kits included).
12 The dust-proof performance of this unit is not guaranteed to be free from damage or failure under all conditions (environment with conductive dust, etc.). Please use an enclosure in environments with smoke containing oil, salt, and moisture.
13 Around this time, the light output will have decreased by approximately 50 %. IEC62087:2008 Broadcast Contents, NORMAL Mode, Dynamic Contrast [3], temperature 30 °C (86 °F), elevation 700 m (2,297 ft) with 0.15 mg/m3 of airborne particulate matter. Panasonic recommends a checkup at the point of purchase after about 20,000 hours. Light-source lifetime may be reduced depending on environmental conditions. Replacement of parts other than the light source may be required in a shorter period. Estimated maintenance time varies depending on the environment.
14 Terminal assignment is fixed. Input signals to primary and backup inputs must be identical.
Specifications
| Projector type | 1-Chip DLP™ projector | |
|---|---|---|
| DLP™ CHIP | ||
| Panel size | 0.8 inch diagonal (16:10 aspect ratio) | |
| Display method | DLP™ chip x 1, DLP™ projection system | |
| Number of pixels | 2,304,000 (1920 x 1200 pixels) | |
| Light source | Laser diode | |
| Light output1,2 | 15,000 lumens | |
| Time until light output declines to 50 %3 | 20,000 hours (NORMAL/QUIET), 24,000 hours (ECO) | |
| Resolution | 4K (3840 x 2400 pixels) (Quad Pixel Drive: ON) | |
| Contrast ratio1 | 25,000:1 (Full On/Full Off, Dynamic Contrast [3]) | |
| Screen size (diagonal) | 70–700 inches (with standard lens — not included) | |
| Center-to-corner zone ratio1 | 90 % | |
| Lens | Lens not included. (See Accessories tab for compatible lenses.) | |
| LENS SHIFT (From the origin point of the lens mounter) |
||
| Vertical | ±60 % (with ET-C1W400/W500/S600/T700), ±50 % (with ET-C1W300/U100) | |
| Horizontal | ±29 % (with ET-C1W400/W500/S600/T700), ±23 % (with ET-C1W300/U100) | |
| Keystone correction range | Vertical: ±40 ° (±5 ° with ET-C1U100; ±10 ° with ET-C1W300; ±16 ° with ET-C1W400; ±22 ° with ET-C1W500) Horizontal: ±40 ° (±3 ° with ET-C1U100; ±5 ° with ET-C1W300; ±10 ° with ET-C1W400; ±15 ° with ET-C1W500) |
|
| Installation | Ceiling/floor, front/rear, free 360-degree installation | |
| TERMINALS | ||
| HDMI™ 1/2 IN | HDMI™ x 2 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input) | |
| DisplayPort™ | DisplayPort™ x 1 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input) | |
| MULTI SYNC IN | BNC x 1 | |
| MULTI SYNC OUT | BNC x 1 | |
| SERIAL IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | |
| SERIAL OUT | D-sub 9-pin (male) x 1 for link control (RS-232C compliant) | |
| REMOTE 1 IN | M3 stereo mini-jack x 1 for wired remote control | |
| REMOTE 1 OUT | M3 stereo mini-jack x 1 for link control (for wired remote control) | |
| REMOTE 2 IN | D-sub 9-pin (female) x 1 for external control (parallel) | |
| LAN | RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible | |
| USB | USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module/USB memory | |
| DC OUT | USB Type A x 1 (for power supply, DC 5 V, 2 A) | |
| Expansion slot | Open slot for function boards, Intel® SDM compatible | |
| Protocol versions | IPv4, IPv65 | |
| Power supply | AC 100–240 V, 50/60 Hz | |
| POWER CONSUMPTION6 | ||
| Maximum power consumption | 1,140 W (11.5–4.7 A) (1,150 VA) (Power consumption is 1,090 W at AC 200–240 V) |
|
| On-mode power consumption (Operating mode) |
[NORMAL] 985 W (AC 100–120 V) 940 W (AC 200–240 V) [ECO] 765 W (AC 100–120 V) 735 W (AC 200–240 V) [QUIET] 760 W (AC 100–120 V) 730 W (AC 200–240 V) |
|
| Operation noise1 | 42 dB (NORMAL/ECO), 38 dB (QUIET) | |
| Dimensions (W x H x D) |
19 19/32" x 8 11/32" x 21 3/16" (498 x 212 x 538 mm) with feet at shortest position | |
| Weight7 | Approx. 59.52 lb (27.0 kg) (without lens) | |
| Operating environment | Operating temperature: 0–45 °C (32–113 °F8), operating humidity: 10–80 % (no condensation) | |
| Applicable software | Multi Monitoring & Control Software, Projector Network Setup Software, Real-Time Tracking Projection-Mapping System, Early Warning Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™ | |
| Control function via LAN |
Crestron Connected™ V2, Crestron XiO Cloud™, Art-Net DMX, AMX® DD, and PJLink™ (Class 2) | |
Notes:
1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped.
2 When [PICTURE MODE] is set to [DYNAMIC] and [OPERATING MODE] is set to [NORMAL].
3 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast Contents, Dynamic Contrast [3], temperature 30 °C (86 °F), elevation 700 m (2,297 ft) with 0.15 mg/m3 of airborne particulate matter. Estimated time until light output declines to 50 % varies depending on environment.
5 Optional AJ-WM50 Series Wireless Module is not compatible with IPv6.
6 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. On-mode power consumption measured at 25 °C (77 °F) operating temperature at an altitude of 700 m (2,297 ft).
7 Average value. May differ depending on the actual unit.
8 When optional AJ-WM50 Series wireless module is attached, operating temperature range becomes 0–40 °C (32–104 °F). The operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F) if the projector is used at an altitude between 1,400 m (4,593 ft) and 4,200 m (13,780 ft).
Accessories
Optional Lenses
| Model | ET-C1U1001 | ET-C1W300* | ET-C1W4002 | ET-C1W500* | ET-C1S600* Std Lens |
ET-C1T700* |
|
Add to Cart |
Add to Cart |
Add to Cart |
Add to Cart |
Add to Cart |
Add to Cart |
|
 |
 |
 |
 |
 |
 |
|
| D:W (16:10) |
0.308–0.330:1 | 0.550–0.690:1 | 0.680–0.950:1 | 0.940–1.39:1 | 1.36–2.10:1 | 2.07–3.38:1 |
| f/stop | 2.13 | 1.94–2.28 | 1.94–2.39 | 1.84–2.34 | 1.84–2.31 | 1.94–2.38 |
Other Accessories
 |
Ceiling mounts | |
 |
Digital interface box (ET-YFB100G) |
Add to Cart |
 |
DIGITAL LINK switcher (ET-YFB200G) |
Add to Cart |
 |
Dual Band Wireless Module (AJ-WM50P) |
$159.00
Add to Cart |