Barco F80-Q12
Overview
Barco F80-Q12 MKII (R94059474)
Low noise 11,300 center lumens, WQXGA+, DLP laser phosphor projector
The stunning image quality and laser phosphor light source of Barco's F80 projectors enable you to provide exceptional experiences while saving both time and money. Like the rest of the F80 series, the F80-Q12 is designed for fixed installation in a wide range of applications such as museums, board rooms, and auditoriums. Thanks to their 3D capability, these Barco DLP projectors are also perfectly fit for theme park dark rides and interactive experiences.
The highly-detailed WQXGA images make no compromises on color to achieve brightness, while the 12K laser projector uses Barco Pulse and Single Step Processing to reduce latency. The advanced cooling design extends the operating lifetime, and the lack of lamps saves on maintenance and consumables. In terms of flexibility, all-glass lenses and wide shift ranges accommodate almost any projector configuration.
To achieve the low noise performance, Barco made optimal use of the unit's internal space. The increased cooling surface enabled the fan speeds to be reduced dramatically resulting in much lower noise. Barco also turned to advanced noise inspection tools, using noise cameras and spectrum analysis to optimize the noise timbre. The Barco F80-Q12 is a silent projector. F80s are so quiet, you can place them in the room without your audience noticing.
Key Features:
- Stunning images with superb color performance
- 11,300 center / 10,700 ANSI lumens of brightness
- Ultimate installation flexibility
- 3D capable
- Silent operation
Features
Superior image quality
The F80-Q12 delivers stunning images with highly saturated colors that allow for accurate color reproduction at all times. What's more, it features the powerful Barco Pulse processing that allows for sharper images and less latency thanks to its Single Step Processing (SSP).
Unprecedented business value
With this projector you can increase your uptime while driving costs down. Through its laser-phosphor light source and advanced cooling design, it provides a long operating time without need for lamp changes — resulting in considerable cost-savings on maintenance and consumables.
Ultimate installation flexibility
The F80-Q12 gives you more flexibility in projector location and orientation as it can run in any orientation. Thanks to its wide array of all-glass lenses and wide lens shift ranges, the F80-Q12 accommodates almost any projector configuration.
Specifications
| Projector type | Single-chip DLP laser phosphor projector |
|---|---|
| Technology | 0.67" DMDTM x1 |
| Resolution | 2,716 x 1,600 (WQXGA+ native) |
| Brightness |
11,300 center lumens* 10,700 ANSI lumens 12,000 ISO lumens |
| Contrast ratio | 1,200:1 sequential, 10,000:1 dynamic * |
| Brightness uniformity | > 90% |
| Aspect ratio | 17:10 |
| Blend | horizontal and vertical edge blending |
| Screen size | max 20 m (65.6 feet) |
| Lens type | GLD Series (D:W 0.8–1.0, 1.0–1.35, 1.35–2.0, 2.0–3.0) FLDX/FLD/FLD+ (lens adapter needed) Motorized standard lens (1.35–2.0:1) included. See Accessories tab for all optional lenses. |
| Optical lens shift | Vertical up to 125%, depending on lens Horizontal up to 50%, depending on lens Motorized zoom and focus (with lens memory on GLD and FLDX lenses) Motorized lens shift (with position memory on all lenses) |
| Color space | Rec. 709 |
| Color correction | P7 RealColor™ |
| CLO (constant light output) | Yes |
| Light source | Laser phosphor |
| Light source lifetime | > 20000 h in normal mode > 12000 h in silent mode > 40000 h in long life mode > 12000 h in high brightness mode |
| Sealed DLP™ core | Yes – standard |
| Optical dowser | laser dimming |
| Orientation | 360° rotation, no restrictions |
| DMX 512 | Standard |
| 3D | Active stereoscopic 3D / Passive stereo compatible max WQXGA @120 Hz |
| Image processing | Embedded warp & blend engine direct adjust OSD + Ptoolset |
| Web browser | integrated |
| Keystone correction | Yes |
| Inputs |
HDMI2.0 (HDCP2.2, HDR10) / 2x DP 1.2 / 12G-SDI / 2x dual link DVI-D / HDBaseT / RJ 45 Ethernet / DMX in-out / RS232 in / 2x USB / 12V out |
| Input resolutions |
Up to 4K UHD @ 60 Hz / Up to 2,560 x 1,600 @ 120 Hz Refresh rates: |
| Software tools | Projector Toolset |
| Control | IR, RS232, RJ45, XLR wired |
| Network connection | 10/100 Ethernet, RJ45 |
| Power requirements | 100–240 V / 50–60 Hz |
| Power consumption | 1050 W nominal, 1200 W maximum |
| Dissipation BTU | max 4100 BTU/h |
| Standby power | <0.5W |
| 24/7 operation | Yes ** |
| Noise level (typical at 25°C/77°F) | 35 dB(A) when used in silent mode / 39 dB(A) in normal mode |
| Operating ambient temperature | 0°–35°C / 32°–95°F |
| Storage temperature | -20°C to 60°C (-4°F to 140°F) |
| Operation humidity | 0% – 80% (non-condensed) |
| Storage humidity | 20 – 90% RH (non-condensed) |
| Dimensions (WxLxH) | 480 x 680 x 227 mm / 18.9 x 26.7 x 8.9 in |
| Weight | 26.8 kg / 59.1 lb (without lens) |
| Standard accessories | Power cord, wireless/XLR wired rugged remote control |
| Certifications | Compliant with UL60950-1 and EN60950-1 Complies with FCC rules & regulations, part 15 Class A and CE EN55022 Class A, RoHS |
| Warranty | Limited 3 years on parts and labor (***) Extendable up to 5 years. |
Notes:
* When measured with the GLD 1.35-2.0:1 lens in Wide Angle
** For optimal performance, switch off the projector regularly. For details please consult the manual.
*** Except on light source: 20000 hours in normal mode, or 3 years, whichever comes first.
Accessories
Optional Lenses
GLD Series
These are the lenses the F80 series of projectors was primarily designed for. Always use a GLD lens when possible.
| P/N | R9801724 | R9801722 | R9801719 Std Lens |
R9801720 | R9801721 |
|
Add to Cart |
Add to Cart |
Add to Cart |
Add to Cart |
Add to Cart |
|
 |
 |
 |
 |
|
|
| D:W WQXGA F80 Legacy |
0.85 – 1.06:1 | 1.06 – 1.43:1 | 1.43 – 2.12:1 | 1.43 – 2.12:1 | 2.12 – 3.18:1 |
| D:W WQXGA+ F80 MKII |
0.8 – 1.0:1 | 1.0 – 1.35:1 | 1.35 – 2.0:1 | 1.35 – 2.0:1 | 2.0 – 3.0:1 |
| f/stop | 2.1 – 2.26 | 2.1 – 2.3 | 2.1 – 2.33 | 2.1 – 2.33 | 2.1 – 2.31 |
| Notes | Motorized | Motorized | Non-Motorized | Motorized | Motorized |
FLD/FLD+/FLDX Series
Recommended when a throw ratio is needed outside the range of GLD series lenses.
| P/N | R9801832 | R9802241 | R9801216 | R9801211 | R9801249 | R9802237 |
| Model | FLDX/UST 90° | FLDX/EN61 | FLD+/EN41 | FLD+/EN44 | FLD/EN16 | FLDX/EN69 |
|
Add to Cart |
Add to Cart |
Add to Cart |
Add to Cart |
Add to Cart |
Add to Cart |
|
 |
 |
|
 |
 |
 |
|
| D:W WQXGA F80 Legacy |
0.57:1 | 2.38 – 3.51:1 | 2.38 – 3.51:1 | 3.51 – 6.45:1 | 5.70 – 9.75:1 | 9.75 – 13.50:1 |
| D:W WQXGA+ F80 MKII |
0.54:1 | 2.25 – 3.30:1 |
2.25 – 3.30:1 |
3.30 – 6.08:1 |
5.37 – 9.19:1 |
9.19 – 12.73:1 |
| f/stop | 2.40 | 2.1 – 2.5 | 2.1 – 2.5 | 2.1 – 2.93 | 2.1 – 2.66 | 2.10 – 2.89 |
| Adapter required | R98014421 | R98014421 | R98014421 | R98014421 | R98014421 | R98014421 |
| Notes | Motorized | Motorized | Motorized | Motorized | Motorized |
Other Accessories
 |
Ceiling mounts | |
 |
Precision Stacking Frame (R9802230) |
Add to Cart |
 |
Motorization Upgrade Kit (R9801757) |
Add to Cart |
 |
F80 Lens Adapter for FLD, FLD+, FLDX and UST+ Lenses (R98014421) |
Add to Cart |