AT1200: The most innovative and versatile acoustically transparent screen material. Similar in gain performance to standard matt white and does not require tensioning for flatness. Acoustical properties comparable to the finest speaker grille cloth. Washable; flame and mildew resistant. Not recommended for screens smaller than 80" wide when used with LCD or DLP projectors.
Gain Chart
Clean surface with a solution of mild dishwashing liquid diluted with warm water. Sponge the surface; rinse with clear water and blot dry. Allow screen to air dry overnight in down position. Do not use cleaning solvents or abrasives.
AT Grey: Offers the acoustical properties of our popular AT1200, while providing the best optical qualities of both Matt White and High Contrast Grey. It is unique in that it offers both a 180° viewing cone and the vivid color contrast associated with high contrast grey materials. Washable; flame and mildew resistant. Not recommended for screens smaller than 80" wide when used with LCD or DLP projectors.
Gain Chart
Clean surface with a solution of mild dishwashing liquid diluted with warm water. Sponge the surface, rinse with clear water and blot dry. Allow screen to air dry overnight in down position. Do not use cleaning solvents or abrasives.
Cineflex: A neutral grey vinyl for rear projection. Cineflex has high resolution and excellent contrast, even in lighted rooms. For use with any type of projection equipment.
Gain Chart
Gently clean this rear projection material with a diluted solution of mild dishwashing liquid and warm water. ARMOR ALL® Multi-Purpose Cleaner may also be used. It is best to lay the surface flat during cleaning. Do not use cleaners which contain abrasives or wax.
ClearSound Perf XT950E: Textile backed matt white perforated surface. Not recommended for use in sizes less than 80” wide. Not recommended for viewing less than 20' from screen. For shorter viewing distances, we recommend ClearSound White Weave XT900E and ClearSound Grey Weave XH600E.
Gently clean this material with a diluted solution of mild dishwashing liquid and warm water.
Fiberglass Matt White: Matt white vinyl reflective surface laminated to tear-resistant woven fiberglass. This surface diffuses projected light in all directions so images can be seen from any angle. Provides accurate color rendition as well as superior clarity. Recommended for use with all high light output projection devices. Requires control of ambient light in the audience area. Washable; flame and mildew resistant.
Gain Chart
Clean surface with a solution of mild dishwashing liquid diluted with warm water. Sponge the surface, rinse with clear water and blot dry. Do not use cleaning solvents or abrasives.
Glass Beaded: Brighter on-axis viewing than matt white surface within a narrower viewing cone. For use with projectors on the same vertical plane as the viewers. Ceiling-mounted projectors are not recommended. Flame and mildew resistant, but cannot be cleaned.
Gain Chart
Carefully dust surface with a very soft brush or cloth. Do not use soap, water, solvents or abrasives.
HiDef Grey: A grey front projection surface that provides greater contrast and black reproduction than standard surfaces, with a lower gain to handle today's super-bright projectors. The grey color enhances color contrast and black levels in the projected image and also allows for more ambient light in the audience area than traditional surfaces. Available on all tab-tensioned and permanently tensioned screens, in sizes through 96" x 96", or 6' high in greater widths.
Gain Chart
Clean surface with a solution of mild dishwashing liquid diluted with warm water. ARMOR ALL® Multi- Purpose Cleaner may also be used. Remove stubborn stains with a solution of rubbing alcohol and water. Do not allow any cleaners to be absorbed by the fabric. Do not use cleaners which contain abrasives or wax.
High Contrast Grey: Grey textile-backed surface offers excellent resolution while enhancing the blacks of LCD and DLP projected images, even as whites and lighter colors are maintained. Performs well in ambient light. Lower gain of 0.8allows use with even the brightest projectors.
Gain Chart
Clean surface with a solution of mild dishwashing liquid diluted with warm water. Sponge the surface, rinse with clear water and blot dry. Do not use cleaning solvents or abrasives.
M1300: The perfect matt white diffusing surface. Extremely broad light dispersion and spectral uniformity. Panoramic viewing angle and true color rendition. Recommended for use with any type of projector in rooms where the light level can be reasonably controlled. Washable.
Gain Chart
Clean surface with a solution of mild dishwashing liquid diluted with warm water. ARMOR ALL® Multi- Purpose Cleaner may also be used. Remove stubborn stains with a solution of rubbing alcohol and water. Do not allow any cleaners to be absorbed by the fabric. Do not use cleaners which contain abrasives or wax.
M2500: A high-contrast front viewing surface, with excellent resolution and high gain. For data-graphics projectors producing through 1000 ANSI lumens. M2500 tolerates a higher ambient light level than most other front projection screen surfaces. Available on all permanently tensioned and tab-tensioned screens
Gain Chart
Clean with a very soft brush or cloth and carefully dust the surface. Do not use soap, water, solvents or abrasives.
Panamax: Available only on screens larger than 10' x 10'. Seamless matt white material for large roller operated screens-through 16' wide. Panamax has excellent dimensional stability. Washable. Most motorized screens with Panamax are not UL listed.
Gain Chart
Clean surface with a solution of mild dishwashing liquid diluted with warm water. Sponge the surface, rinse with clear water and blot dry. Do not use cleaning solvents or abrasives.